Flow-Rider
Burner
Make one out of bisalloy and then bet everyone when they're drunk that they can't cut it with a hacksaw.have you thought about tempering it?
Make one out of bisalloy and then bet everyone when they're drunk that they can't cut it with a hacksaw.have you thought about tempering it?
World Trail make theirs out of Hardox 450 steel and they weigh in at a svelte 1374g for the head only. Very sexy water cut tool and beautifully finished for $230 (no handle)Make one out of bisalloy and then bet everyone when they're drunk that they can't cut it with a hacksaw.
Yeah, I have seen them too, fairly pricey.World Trail make theirs out of Hardox 450 steel and they weigh in at a svelte 1374g for the head only. Very sexy water cut tool and beautifully finished for $230 (no handle)
Looks to only be ~3mm thick, maybe 4mm max.
Kuranda Trail Tool - World Trail
Developed over years of testing, from the jungles of Far North Queensland, to the rigors of Tasmania's Blue Derby region, the Kuranda Trail Tool is the go to for the professional trail-builder. Constructed via Cold Cut water-jet technology, out of Hardox 450 steel, the Kuranda's unique 6 tine...world-trail.com
blackfish, bream and mullet are my target..so much fun on the flyrodNice. Chasing luderick with them?
I am going to go down and talk to the fitters, we get all kinds of special steel in work for different jobs. The off cuts I grabbed are what's left when a circle is cut out of a steel sheet.Yeah, I have seen them too, fairly pricey.
I was going to try and make one from 420 stainless.
I think I used this when doing a working bee at Smithfield trails. Such a brilliant tool and it cut the trail edges like butter.World Trail make theirs out of Hardox 450 steel and they weigh in at a svelte 1374g for the head only. Very sexy water cut tool and beautifully finished for $230 (no handle)
Looks to only be ~3mm thick, maybe 4mm max.
Kuranda Trail Tool - World Trail
Developed over years of testing, from the jungles of Far North Queensland, to the rigors of Tasmania's Blue Derby region, the Kuranda Trail Tool is the go to for the professional trail-builder. Constructed via Cold Cut water-jet technology, out of Hardox 450 steel, the Kuranda's unique 6 tine...world-trail.com
I tried, but couldn't get into it. I did like waving my rod around in the air though.blackfish, bream and mullet are my target..so much fun on the flyrod
Not quite, mid is 44, 45, 46 so you're still safe.Miles in! Well not miles, but next birthday will be 43. I believe that is the first year of "mid 40s"?
Oh good. I shall maintain the course - 73 going on 15!Not quite, mid is 44, 45, 46 so you're still safe.
Good, gives me a couple extra years tooNot quite, mid is 44, 45, 46 so you're still safe.
FuckNot quite, mid is 44, 45, 46 so you're still safe.
it is my meditation....I tried, but couldn't get into it. I did like waving my rod around in the air though.
No but vampires can.Do rear view mirrors count?
Sent from my SM-G780F using Tapatalk
Can you talk "Fitter" though?..you could always give them a peace offering of a nice new box of bandaids for their knuckles.I am going to go down and talk to the fitters, we get all kinds of special steel in work for different jobs. The off cuts I grabbed are what's left when a circle is cut out of a steel sheet.
Would be nice to get some of that hardened stuff in 3mm.
And a gift box of discontinued solvo barsCan you talk "Fitter" though?..you could always give them a peace offering of a nice new box of bandaids for their knuckles.
Either this is one of @Minlak's other accounts or you two were separated at birth. I, on the other hand, am hopeless.The first step is admitting you have a problem, but it's alright - I have Hope...
View attachment 373088