Thats what a lot of them look like when they get popped apart by trying to tap a jammed/corroded/rusted bearing out of the ZS cup.It is not bearings in a race they are sealed cartridge bearings
They had replacement headsets for it (I assume ball and cage?), but if I can get away with just replacing the bearing I will as it'll be up for sale soon if I ever get my Banshee.really?....the chances of any modern bike manufacturer still using open ball and cage bearings is very slim!
its pretty simple, as seen in this clear and easy to read diagram
Buyers guide to mountain bike headsets
Demystify headsets by reading this guide. What things you need to measure before ordering. How to tell an integrated headset from a regular headset andwww.merlincycles.com
Nope, they're not sealed cartridge bearings. I've had them out, they look the same as this, except more fucked.
I'm not gonna say no. I'll flick you a PMThis any use to ya?
You can have the top and bottom bearings, 44/56 cups, races if they're suitable.
#freebritney
Semi-integrated just means the cups are fitted inside the head tube, with the bearings then fitted in the cups. Open bearings are very much an option for this type of headset.
I have a bearings from a ZS44/ZS55.. stupid Scott, unsure if the lower 1mm makes a difference to bearing size or if they just use a slightly thinner wall thickness on the cups? Either way free for trial and error if needed.The guys going to call me back. If I get a chance I'll pull the one off my bike later and take it in.
I'm tempted to just buy these on the offchance they'll fit
1 1/8 Headset Bearings | Headset Bearing | Bike Parts - Velogear
Cheers. Will give these ones from Knuckles a go and see, then drop you a line if not!I have a bearings from a ZS44/ZS55.. stupid Scott, unsure if the lower 1mm makes a difference to bearing size or if they just use a slightly thinner wall thickness on the cups? Either way free for trial and error if needed.
Are you fur-real? Still no Banshee!? Sorry for thread derail, but that sucks.if I ever get my Banshee
Its on a fucking boat with 2 other frames on their way down. Apparently was going to cost $500 to ship each frame.Are you fur-real? Still no Banshee!? Sorry for thread derail, but that sucks.
nothing to worry about thenIts on a fucking boat with 2 other frames on their way down. Apparently was going to cost $500 to ship each frame.
*whole new bikeI'm sure it's been said already, but this is a good opportunity to purchase a whole new sealed bearing headset @Rorschach . Plenty of options out there for any budget.
Even at the cheaper end, Cane Creek 40 are a great headset.I'm sure it's been said already, but this is a good opportunity to purchase a whole new sealed bearing headset @Rorschach . Plenty of options out there for any budget.
It's going to be sold when I (eventually) get my Prime, so I just want to get it back up to spec, but if I can't get a bearing then I'll get a new headset put inI'm sure it's been said already, but this is a good opportunity to purchase a whole new sealed bearing headset @Rorschach . Plenty of options out there for any budget.
Hopefully soon!*whole new bike
#freebritney
Where can I claim my free britney??*whole new bike
#freebritney
Usually, from the western suburbs of any east coast population centre.Where can I claim my free britney??