Cocaine - They said it was 100% safe to order from them - Was also way cheaper than anything carbon I used to orderSounds like it failed to clear customs...what did you order? Be honest...
Boring answer, awaiting customs clearance it will update in a few days. Poor wording.Have not bought from Ali in a long time and I get this in tracking - Clearing Customs -Failed to Clear Customs - am I now a drug smuggler or is that just the default for waiting to clear?
View attachment 408040
I had something fail to clear customs, it showed up 2 days to later.Have not bought from Ali in a long time and I get this in tracking - Clearing Customs -Failed to Clear Customs - am I now a drug smuggler or is that just the default for waiting to clear?
View attachment 408040
Mine "fail" to clear customs all the time and rock up in the PO box. I think it's just a system error or somethingHave not bought from Ali in a long time and I get this in tracking - Clearing Customs -Failed to Clear Customs - am I now a drug smuggler or is that just the default for waiting to clear?
View attachment 408040
Got out for a ride with the spacer and 26t ring installed.Realised I didn't link any of the items yesterday.
Just found this amazing item on AliExpress. Check it out!
AU$46.39 17%OFF | PASS QUEST Direct Mount For GXP Chainring 24/26/28/30T/32T/34T/36T/38T/40T Chainwheel for SRAM NX GX XX1 XX1 Eagle X01 X01 Eagle
46.83AU $ 17% OFF|PASS QUEST Direct Mount For GXP Chainring 24/26/28/30T/32T/34T/36T/38T/40T Chainwheel for SRAM NX GX XX1 XX1 Eagle X01 X01 Eagle| | - AliExpress
Smarter Shopping, Better Living! Aliexpress.coma.aliexpress.com
The link for the spacer is toast but this is the same one...
10.87AU $ |Pass Quest Gxp Offset Crank Washer 1.6mm 2mm 2.5mm Al7075-T6 For Sram Crank
Smarter Shopping, Better Living! Aliexpress.coma.aliexpress.com
The only thing with the spacer is that it pushes the mounting torx screws out towards the BB and so an extra spacer washer is needed so the screw don't foul on the BB. This is just a interim fix to see if the 26t with 155mm crank is worth it.
Then I think I'll fork out for a proper offset steel ring
turned up today, quality looks OK/good for the price.I got one a year ago. Works well compared its accuracy with other guages I had at the time I bought it. Just don't go over 30 psi on the 30 psi guage it spins the needle round the dial like a big lucky dip wheel. You can take the guage apart to fix it though.
What is this for?turned up today, quality looks OK/good for the price.
Really nice that it seals before pressurising (and that bit is easily replaceble silicone tube)
Got a Schrader one for moto too, and both read same: about 1psi less than Topeak elec one (that i suspected was reading a bit high...)
good!
moto/car one glows (briefly) after UV charge
View attachment 408340
Checking tyre pressuresWhat is this for?
Don't forget DON'T GO OVER 30 PSIturned up today, quality looks OK/good for the price.
Really nice that it seals before pressurising (and that bit is easily replaceble silicone tube)
Got a Schrader one for moto too, and both read same: about 1psi less than Topeak elec one (that i suspected was reading a bit high...)
good!
moto/car one glows (briefly) after UV charge
View attachment 408340
Don't forget to go over 30psi, check.Don't forget DON'T GO OVER 30 PSI
2nd ride on this 26t chainring, but back on 29er wheelset, definitely felt climbing was "easier" today than with the original 28t. Whether that is because of the wagon wheels or the fact I've managed 4 weeks in a row (1 ride each week) so I have some semblance of fitness I'm not sure.Bought these recently. Turned up today.
26t chainring (only in 0mm offset), hence the spacer.
After putting the 155mm cranks on I wanted to try a smaller chain ring than the existing 28t one (though it's probably, most definitely possible that my issue stems from lack of fitness lol).
View attachment 408023
PASS QUEST do pose a valid question though...
How is the PASS QUEST-MTB Bike Chainring holding up. I'm thinking of getting one of their oval chainring to try. Did you have to take a link out of the chain when dropping down to the 26T from the 28T.Got out for a ride with the spacer and 26t ring installed.
With the exception of some excess paraffin wax on my newly waxed chain that caused some chain suck just as we left the carpark, the chain ring worked flawlessly.
Definitely a bit easier to pedal up (than the 28t) with the 155mm kids cranks on the bike.
15kms and 459m elevation this arvo on it, so a total of about 50kms now. Has been flawless.How is the PASS QUEST-MTB Bike Chainring holding up. I'm thinking of getting one of their oval chainring to try. Did you have to take a link out of the chain when dropping down to the 26T from the 28T.
Pew pew pew pew!
Went a bit further than your 60t ratchet ?15kms and 459m elevation this arvo on it, so a total of about 50kms now. Has been flawless.