riderseventy7
Likes Dirt
When Norco and their distributor told me they were going to replace my A-line frame under warranty I was unsure what I was going to do with the new frame. That was until I saw the pretty curves and pivot hardware of the Aurum frame in the flesh. I decided to spend some dollars and build the frame up to sample how it rides.
Frame - 2013 Norco Aurum
Rear shock - Elka Stage 5
Front shock/fork - Marzocchi RCV (temporarily)
Handlebars - Deity Dirty Thirty
Stem - Marzocchi
Headset - Cane Creek Angle Set
Grips - DMR lock on
Saddle - WTB Silverado (temporarily)
Seatpost - Norco
Front brake - Shimano XT
Rear brake - Shimano XT
Cranks - Shimano Saint
Chainguide - MRP G2
Chain - Shimano something or other.
Chain ring - E13 G-Ring (blue)
Pedals - Deity Decoy (old but perfect)
Rear derailleur - Shimano Saint
Rear shifter - Shimano Saint
Cassette - SRAM PG970 11-26T
Front hub - Hope Pro2 evo (blue)
Rear hub - Hope Pro2 evo (blue)
Front rim - MTX 33
Rear rim - MTX 33
Spokes - DT Swiss
Nipples - DT Swiss
Tyres - Maxxis Minion F 3C's
Tubes - None
Total weight - :noidea:
And here it is, not quite finished but ready to roll.
And it joins the Scalp in the stable, (Scalp here http://www.rotorburn.com/forums/showthread.php?247696-Nukeproof-SCALP&highlight=scalp)
And the rest,
Frame - 2013 Norco Aurum
Rear shock - Elka Stage 5
Front shock/fork - Marzocchi RCV (temporarily)
Handlebars - Deity Dirty Thirty
Stem - Marzocchi
Headset - Cane Creek Angle Set
Grips - DMR lock on
Saddle - WTB Silverado (temporarily)
Seatpost - Norco
Front brake - Shimano XT
Rear brake - Shimano XT
Cranks - Shimano Saint
Chainguide - MRP G2
Chain - Shimano something or other.
Chain ring - E13 G-Ring (blue)
Pedals - Deity Decoy (old but perfect)
Rear derailleur - Shimano Saint
Rear shifter - Shimano Saint
Cassette - SRAM PG970 11-26T
Front hub - Hope Pro2 evo (blue)
Rear hub - Hope Pro2 evo (blue)
Front rim - MTX 33
Rear rim - MTX 33
Spokes - DT Swiss
Nipples - DT Swiss
Tyres - Maxxis Minion F 3C's
Tubes - None
Total weight - :noidea:
And here it is, not quite finished but ready to roll.
And it joins the Scalp in the stable, (Scalp here http://www.rotorburn.com/forums/showthread.php?247696-Nukeproof-SCALP&highlight=scalp)
And the rest,
Last edited: