What did you do TO / WITH / FOR your bike today!

[Plankosaurus]

Tried to 3D print one of those LED butt plugs yet?

Can't get the wiring right, but otherwise peachy

Sent from my G8441 using Tapatalk

 

[cokeonspecialtwodollars]

Played with the new 3d printer - 32mm and 35mm fork seal drivers

Next trick will be to make some chain guides and tacos and see how they hold up. Maybe look at shock hardware too, because making my own would be much better than waiting weeks for the right thing then finding I ordered the wrong size.

Sent from my G8441 using Tapatalk

What printer did you get Planko? Finished print looks pretty good.

 

[Plankosaurus]

What printer did you get Planko? Finished print looks pretty good.

Creality ender 3 - fairly cheap but all reports say it punches well above its weight.

I'm still struggling a bit with generating support for overhangs, but stuff with minimal overhang prints brilliantly with pla filament

Sent from my G8441 using Tapatalk

 

[pink poodle]

Can't get the wiring right, but otherwise peachy

Sent from my G8441 using Tapatalk

Got any prototypes?

 

[frenchman]

fresh bearings for the trail rig. Can definitely recommend the NSK bearings. Have been getting good life out of them.

 

[Jpez]

Bought myself a Bunnings level tool chest. (Slathered it with the obligatory MTB stickers) and a oh so nice set of Wera hex keys!
First ever proper tool chest. Almost feel like a real MTBr now!
Now I won’t have to go searching for something that might or might not be in the garage, mancave/office, or jammed under some shit somewhere.
I’m thinking I should have have got the next size up though.

 

[beeb]

Now I won’t have to go searching for something that might or might not be in the garage, mancave/office, or jammed under some shit somewhere.

...in theory.

 

[pink poodle]

Bought myself a Bunnings level tool chest. (Slathered it with the obligatory MTB stickers) and a oh so nice set of Wera hex keys!
First ever proper tool chest. Almost feel like a real MTBr now!
Now I won’t have to go searching for something that might or might not be in the garage, mancave/office, or jammed under some shit somewhere.
I’m thinking I should have have got the next size up though. View attachment 367084

Much harder than choosing the right one is your next step - learning to put things away.

 

[Jpez]

Much harder than choosing the right one is your next step - learning to put things away.

...in theory.

Yes you are both 100% correct, bloody killjoys.

On reflection the photo is a complete fail. There should be an icy cold craft beer sitting on top of it. I promise to do better next time

 

[Ultra Lord]

On reflection the photo is a complete fail. It should be on the oven. I promise to do better next time

Fixed.

 

[Jpez]

Fixed.

I tried but it wouldn’t fit under the range hood

 

[Ultra Lord]

I tried but it wouldn’t fit under the range hood

New kitchen time!

 

[fjohn860]

After a false start or two, finally got the JBAC installed in my fork.

Initial impressions are excellent. 90psi in the low and 140psi in the high. Still need to play with the pressures a fair bit, but takes bugger all to get the fork moving now and not blowing through the mid stroke

Proper shakedown tomorrow.

 

[pink poodle]

Someone is ready to move into to production! If you need a connection for bling valve caps, I reckon that @Scotty T is due for an expansion of products.

 

[fatboyonabike]

got the Tranny back today and started stripping back the paint
this is the result of about 15min work and 2 cans of gasket stripper.

 

[Isaakk]

got the Tranny back today and started stripping back the paint
this is the result of about 15min work and 2 cans of gasket stripper.

... why did I not think of that when stripping the STP. Painting the stripper on was a PITA. Looks good.

 

[Chriso_29er]

Used it as a prop to play around with my camera.
Trying to get settings right for a light painting technique. This was a 30 sec exposure.

 

[pink poodle]

What colour @fatboyonabike?

 

[Ultra Lord]

Used it as a prop to play around with my camera.
Trying to get settings right for a light painting technique. This was a 30 sec exposure.

Please. If you won't buy the bottle opener atleast pick up one of these.

markers & highlighters - Google Search

 

[pink poodle]

Bottle holders are lame. He should hit those bolts with black and match it to the contrast. Or better still get some black chrome custom skull bolts.