Thanks guys hopefully I can get out this weekend of a bit of a ride and muck around with pressures and settings. I'm guessing if the rebound is too slow that would also effect the small bump? Ie not recovinging quick enough. I have set that back up as per the fox pressure chart and will start...
Hey,
Thanks yeah that's also what I'm thinking but for the cost $100 I thought it was worth a shot. Way better than the magura stock shock for pedaling and jumps just the small fast impact stuff I'm not super happy with currently
Hi All,
I have a Fox float x evol that feels quite harsh on the small bumps roots ruts etc. Im also not using all the travel over bigger stuff. The shock is a "custom tune" c2bs off a yeti sb6 which i have fitted to my Focus Sam after giving it a service. I have taken the spacer which from what...
Ok. So after sliding the outer in the frame abit more from the remote it's working again. The remote not springing back but it never has so looks like the cartage is all good!
Yeah I can push outer in and out the frame a fair bit. I mean it was working fine until I have change the post height apart from the remote not really spring back by its self after dropping the post. I'm in WA
Service is probably a good idea. I don't think it has ever been set up properly since buying the bike the remote was always sloppy. I thought pulling the post further out of the frame may of just put more tension on the wire activating it or something
So I have figured out I have been riding around for years with my saddle to low. So I have adjusted the hight of my post but now my dropper goes down an inch or so when seated. Any one have any ideas on a easy solution. I have played around with the barrel adjuster but hasn't helped at all.
Any...
Hi
Thanks for your help I have Googled it a heap but couldn't find that much info with only pain while decending. I will try them all the way back and see how that goes
Cheers
Hi guys
I thought about giving clipless a shot probably 8 months ago and have been on them ever since. I have been messing with the cleat position lately because I have been getting sore arches when depending ever since I have been using them. I moved them forward and my calf's were getting...
Had my first proper ride on it on the weekend. It feels very stable at high speeds and eats up really rough stuff very well. I wasn't super impressed with the fork at first I think it also preforms best when its getting really worked hard. Tires are super sticky and make the climbs slightly...
Got this beast a couple of weeks ago Focus Sam 2.0 really happy with the bike over all. Just need a couple of little things get some rubber boots for the crank arms and rip the tubes out.
Hey guys
Yep worked out the barrel adjuster, if I do tighten it the remotes slack comes up and it springs back but the post is activated the whole time. I am assuming this is because the cable is pulling the actuator. There does seem to be a fair bit of extra cable inside the frame because even...
hey guys
Just got a new bike with a KS Lev Integra and the remote is not springing back. I had a look in the instruction manual and it talks about a barrel adjuster. I have had a good look and I cant seem to find a barrel adjuster on the "noodle". Is it going to be just the case of loosing the...
Hey thanks for your reply,
yeah I thought that it would be ok and if not I could just getting a shorter stem. Anyway pulled the trigger on a 2.0
Cheers
Hey guys
Just wondering if anyone has rode a medium focus Sam at all. I'm 172 and I don't have access to one to test out. The top tube looks quite long at 595 for the medium is about 30mm longer than my current bike but what they are calling reach from the head tube to the bottom bracket is...
I got my 142x12 to 135x12 conversion end caps from here they will prob have what you need in the list
http://www.wheelbuilder.com/dt-swiss-axle-conversion-kits.html
Thats what I thougt too but it is locking up before it is even in the position to use the lock out button
Gave it a spray appears to be better but I can feel some grinding so might need some more work
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.