TAS FOUND
- Thread starter Scotty675
- Start date
Hambo sayeth 2.37mm thick, 9mm internal, 12.25mm external...
Will look... nope though I do have a baggie in the parts box of some about 0.8x15x20. Who the fuck knows what they are for.
Will look... nope though I do have a baggie in the parts box of some about 0.8x15x20. Who the fuck knows what they are for.
Last edited:
rockmoose
Likes Bikes and Dirt
Sounds like the first post in a new PYR pre-build thread.
@Dales Cannon thanks for checking.
I’ve ordered some from Taiwan so still looking as I’m guessing a month away.
So annoying as I’ve had 4 or 5 sets of these cranks and I’m sure there are a set or two somewhere
I’ve ordered some from Taiwan so still looking as I’m guessing a month away.
So annoying as I’ve had 4 or 5 sets of these cranks and I’m sure there are a set or two somewhere
PJO
in me vL comy
Hey Scotty, I've got some chainring spacers I used to alter the chainline on a set of boost cranks when running on a std frame, not XTR ones. I'll go and measure them tomorrow and let you know. If they fit the bill, you can have a loan till yours arrive.
Edit: the sheds only 20 paces out the door but it's cold and I'm enjoying my whiskey so can't be arsed untill tomorrow, I'm sure you'll understand
The spacers space the chainring to bolt out, smaller chainrings don’t require them. Silly set up to catch us out again. So not for chain line but fastening the chainring to crank snugly
moorey
Carte d'or what?
Ah, ok. Only seen this on smaller chain rings for 104 cranks in the past. Sorry.
These are them
www.sjscycles.co.uk
Shimano XTR FC-M9000 Gear Spacers Y1PV98030
For use with Shimano XTR FC-M9000 11 speed single chainsets. 2.37mm thick, 9mm internal, 12.25mm external These gear spacers can also be used on the following chainset: - Shimano XTR FC-M9020-B1 This is an 'A' match which indicates that the parts are the same in materials, appearance, finish...