I'd argue it is probably 121mmM8120 is 120mm.
EDIT: Or perhaps scottys are off by 1mm...
Last edited:
I'd argue it is probably 121mmM8120 is 120mm.
I would too but there a wee lip on the lockring, its 120mm flat or 121mm with the ruler up off the lip.I'd argue it is probably 121mm
EDIT: Or perhaps scottys are off by 1mm...
If it’s not going to work I’ll work a trade for mt900 if you like. I bought a couple of setsI'm taking a bit of a gamble on it not mattering so much for me but it may end up more critical.
My chain will come off the idler onto the chainring 3mm out of whack as the manufacturer specifies 52mm chainline.
Its either going to work or I'll have to make minor adjustments... all failing... M8100.
Will find out in about a week.
View attachment 372660
Given it's on the drive side, might put stress on the idler bearings. But maybe not immediately apparent? Guess you'll have to eyeball it.Will find out in about a week.
This happens to me but I'm on a 52mm chainline with 10sp Deore. Maybe it's the Sunrace cassette and KMC chain?They said 52mm chainline, and sent me this link https://www.alltricks.com/surl/what-is-boost Also said 55 may work fine, except maybe chain falling down when backpedalling in lowest gears.
There is a Shimano direct mount chainring tool? - mmmmmm guess I never ordered it eitherSome cassettes and chains do it more. That article also had 49mm as the 'best' chainline for 142 rear spacing (prob your 10sp). But you can see it lines up with the 6th sprocket down. So it's always a compromise.
Ordered the 7100 cranks in the pushys 12% off the other night. Along with some 12sp chains, and a 51t cassette.
Forgot to order a shimano dm chainring tool though. Didn't account for that being different again. So used to the raceface stuff which uses an old isis slipned bb tool for it's lockrings.
There is a Shimano direct mount chainring tool? - mmmmmm guess I never ordered it either
Fear not, it is in the box with your crank.Yeah. Bastards. It's like one and a half hobos too!
Bless you good sir, was just about to order that with mtb's freeship, it would seem I can save that money for 2 pints tonight..Fear not, it is in the box with your crank.
No, bless you kind sir for reminding me I was having dry Feb.Bless you good sir, was just about to order that with mtb's freeship, it would seem I can save that money for 2 pints tonight..
Perfect, you’ll be able to give us a comparison!Even though I bought a banshee, I sold a mate on a Ripmo AF. He's now got one on order. But apparently they arrived in the country with no DVO forks or shimano shifters.
I was told this a few days back, that new bikes are arriving with parts missingEven though I bought a banshee, I sold a mate on a Ripmo AF. He's now got one on order. But apparently they arrived in the country with no DVO forks or shimano shifters.