moorey
call me Mia
You should see my Hope lockons. Not a hint of jagged wire.
AM Second Time Lucky (Craftworks FRX V2)
- Thread starter Lucaw
- Start date
Oddjob
Merry fucking Xmas to you assholes
Still waiting for a nice thing to show up...
...I'll be over here when you get back from your neighbours house.
Sent from my SM-G970F using Tapatalk
moorey
call me Mia
Back to your penis rocket please, Jeff Bezos.
Lucaw
Next in line
Pulled apart and cleaned the entire bike, and fitted a 150mm ks lev integra from @rangersac as well as a new chain
The chainring is making noises like it needs to be replaced soon
The chainring is making noises like it needs to be replaced soon
moorey
call me Mia
I can think of at least 10 other possibilities…chainring being the last, unless it’s new ring/old chain.
New tyre?
Lucaw
Next in line
The chain ring is on it’s 3rd chain, and is sucking a bit, as well as the teeth being a bit hooked
And no, I haven’t gotten a new rear tire yet
beeb
Dr. Beebenson, PhD HA, ST, Offset (hons)
I say pin it in place, rig up some kind of return spring, and 2-foot ratchet-boost your way down the trails from now on! Zoom zoom!
PS: That sucks.
pink poodle
気が狂っている男
That is an impressive bit of work. How did you get there?
Lucaw
Next in line
I forgot to tighten them up enough before I tried looking for my chain breaker, which I ultimately realised I had left in a park. Then I went for a ride, hucked some rock ledges to flat and rounded the spindle. I replaced the now with my spare set, as well as the tyres because one close call is enough.
pink poodle
気が狂っている男
And what else is inside panDora's dox..?
That's some mighty fine work.
That's some mighty fine work.
Lucaw
Next in line
Huh?
pink poodle
気が狂っている男
You're misfortunes/calamities always seem to be jumbled up in a web of issues.
moorey
call me Mia
Your.
moorey
call me Mia
Nope, stay with Shimano…just do the pinch bolts up properly first time.
Jpez
Down on the left!
Ain’t nothing wrong with an honest set of Turbines or old Atlas’s.
moorey
call me Mia
Absolutely not. I’m just sayin the crank ain’t the issue….and Shimano are probably cheapest/easiest solution.
Lucaw
Next in line
I reckon it’s new fork time.
The 55 is leaking out of the left leg main seal and the top cap on the right leg
The stantion also seems to be slightly bent when held against a straight edge
This is also is also probably contributing to the high levels of stiction even after a service. To top all that off, they are also really under Sprung and bottom out too often but I can’t get a heavier spring
So I chuckled a set of fux 34’s on the front while I look for new forks
The 55 is leaking out of the left leg main seal and the top cap on the right leg
The stantion also seems to be slightly bent when held against a straight edge
This is also is also probably contributing to the high levels of stiction even after a service. To top all that off, they are also really under Sprung and bottom out too often but I can’t get a heavier spring
So I chuckled a set of fux 34’s on the front while I look for new forks
pink poodle
気が狂っている男
Damn...those fox aren't going to hold up against your track record long. What forks are you looking for?
Lucaw
Next in line
Maybe something like a Lyrik, totem, x Fusion vengeance or metric? I want to try something other than a marzocchi for the moment