wkkie
It's Not Easy Being Green
The latest hardtail into the stable is a Waltly.
Wasn't going to be titanium (or Waltly) originally but Marino got way bad with communication so this was the result!
Frame - Custom Waltly Pinion
Fork - Marzocchi Z1 coil, 160mm, 29 inch
Headset - Brand X tapered, 44/56
Stem - DMR Defy, 50mm, 31.8 (back on shortly)
Handlebars - Spank Spike, 800mm, 50mm rise
Grips - ODI Rogue, 90mm
Cranks - Pinion forged, 170mm
Bottom Bracket / drivetrain - Pinion C1.12
Chainring - Pinion 39t, Gates Carbon Drive
Shifter - Pinion DS2
Rear cog - Pinion 39t, Gates Carbon Drive
Belt - Gates Carbon Drive, 118t
Pedals - OneUp Composites
Brakes - Shimano SLXT. XT levers on SLX M7120 calipers
Brake Pads - Uberbike Race-Matrix
Rotors - TRP, 8 inch, 2.3mm thick
Front Wheel - 27.5 inch Zerode carbon on Hope Pro-4, 32h
Front tyre - Continental Der Baron, 2.4, 27.5 inch
Rear wheel - 27.5 inch Zerode carbon on single speed Hope Pro-4, 32h
Rear tyre - Maxxis DHR2 2.4, TR EXO, 27.5 inch w. custom insert
Seat Post Clamp - Meijun (green Ali special), 34.9mm
Seat Post - PNW Rainer, 200mm, 31.6
Dropper lever - Ztto, oil slick
Seat - Dartmoor Trail V2
Cables - Uberbike braided gear and brake
Full build photos are up. Check the last post for more detailed photos.
Wasn't going to be titanium (or Waltly) originally but Marino got way bad with communication so this was the result!
Frame - Custom Waltly Pinion
Fork - Marzocchi Z1 coil, 160mm, 29 inch
Headset - Brand X tapered, 44/56
Stem - DMR Defy, 50mm, 31.8 (back on shortly)
Handlebars - Spank Spike, 800mm, 50mm rise
Grips - ODI Rogue, 90mm
Cranks - Pinion forged, 170mm
Bottom Bracket / drivetrain - Pinion C1.12
Chainring - Pinion 39t, Gates Carbon Drive
Shifter - Pinion DS2
Rear cog - Pinion 39t, Gates Carbon Drive
Belt - Gates Carbon Drive, 118t
Pedals - OneUp Composites
Brakes - Shimano SLXT. XT levers on SLX M7120 calipers
Brake Pads - Uberbike Race-Matrix
Rotors - TRP, 8 inch, 2.3mm thick
Front Wheel - 27.5 inch Zerode carbon on Hope Pro-4, 32h
Front tyre - Continental Der Baron, 2.4, 27.5 inch
Rear wheel - 27.5 inch Zerode carbon on single speed Hope Pro-4, 32h
Rear tyre - Maxxis DHR2 2.4, TR EXO, 27.5 inch w. custom insert
Seat Post Clamp - Meijun (green Ali special), 34.9mm
Seat Post - PNW Rainer, 200mm, 31.6
Dropper lever - Ztto, oil slick
Seat - Dartmoor Trail V2
Cables - Uberbike braided gear and brake
Full build photos are up. Check the last post for more detailed photos.
Attachments
-
323.8 KB Views: 585
-
297.8 KB Views: 614
Last edited: