I should probably chuck this here.
I put some bits of plywood together in a rather shonky fashion.
View attachment 330221
View attachment 330222
This nicely sits in the back of my Skoda Yeti (with the spare tyre and half floor still in place), which with the rear seats removed will comfortably fit two 26" bikes with the front wheels off (The advantage of being a short-arse riding 26" bikes ).
View attachment 330223
View attachment 330224
The only thing remaining is to take the whole thing for a good drive, and see if it needs a couple of cross braces, to stop the ply flexing and the bikes whacking each other. I doubt this will be an issue though. It's 12mm ply.
Also, the pissy little screws you see holding the fork mounts down are just there to tack the mounts in place to check the bikes fitted. They are now 1/4" T-nuts and bolts.
I put some bits of plywood together in a rather shonky fashion.
View attachment 330221
View attachment 330222
This nicely sits in the back of my Skoda Yeti (with the spare tyre and half floor still in place), which with the rear seats removed will comfortably fit two 26" bikes with the front wheels off (The advantage of being a short-arse riding 26" bikes ).
View attachment 330223
View attachment 330224
The only thing remaining is to take the whole thing for a good drive, and see if it needs a couple of cross braces, to stop the ply flexing and the bikes whacking each other. I doubt this will be an issue though. It's 12mm ply.
Also, the pissy little screws you see holding the fork mounts down are just there to tack the mounts in place to check the bikes fitted. They are now 1/4" T-nuts and bolts.