beeb
Dr. Beebenson, PhD HA, ST, Offset (hons)
Gave the bike a wash before heading up to Falls Creek this coming weekend, and realised it was probably time for an updated spec-list.
The biggest update of the last couple of weeks is the lack of upgrades - Only added a waterbottle to store some tools & spares to help take a little weight out of the hydration pack.
Can't wait to ride Falls again!
Frame - 2018 Santa Cruz 5010 CC V2 XL ("Ink Blue")
Rear shock - 2019 Fox Float DPX2 (200x51mm, 130mm wheel travel)
Front shock/fork - 2019 For Factory 34 (37mm offset, 130mm travel)
Handlebars - Spank Spike Vibrocore (31.8mm, 50mm rise, cut to 770mm)
Stem - Thompson X4 40mm
Headset - Work Components -1.0 degree Angleset
Grips - ODI Elite Pro
Saddle - Ergon SME3
Seatpost - BikeYoke Revive 185mm
Front brake - Hope Tech 3/E4 203mm Rotor
Rear brake - Hope Tech 3/E4 183mm Rotor
Cranks - Shimano XT
Chainguide - N/A
Chain - Shimano HG-701
Pedals - Pedalling Innovations Catalyst
Rear derailleur - Shimano XT (GS / med-cage) with Wolftooth WolfCage
Rear shifter - Shimano XT
Cassette - Garbaruk 11-50t
Front hub - Project 321 Boost
Rear hub - Project 321 Boost (216POE, Quiet pawls)
Front rim - Nextie Premium Trail 40mm (36mm internal)
Rear rim - Nextie Premium Enduro 36mm (29mm internal)
Spokes - DT Swiss Comp
Tyres - Maxxis DHF 3C 2.6" (Front), Minion Aggressor 2.5" DD (Rear)
Tubes - Stans Tubeless
Total weight - T.B.A
(New pic with a new phone - as I just got a new phone after smashing my old one last weekend. The camera is a big upgrade from the previous, so I should finally be able to get some decent pics in near future)
The biggest update of the last couple of weeks is the lack of upgrades - Only added a waterbottle to store some tools & spares to help take a little weight out of the hydration pack.
Can't wait to ride Falls again!
Frame - 2018 Santa Cruz 5010 CC V2 XL ("Ink Blue")
Rear shock - 2019 Fox Float DPX2 (200x51mm, 130mm wheel travel)
Front shock/fork - 2019 For Factory 34 (37mm offset, 130mm travel)
Handlebars - Spank Spike Vibrocore (31.8mm, 50mm rise, cut to 770mm)
Stem - Thompson X4 40mm
Headset - Work Components -1.0 degree Angleset
Grips - ODI Elite Pro
Saddle - Ergon SME3
Seatpost - BikeYoke Revive 185mm
Front brake - Hope Tech 3/E4 203mm Rotor
Rear brake - Hope Tech 3/E4 183mm Rotor
Cranks - Shimano XT
Chainguide - N/A
Chain - Shimano HG-701
Pedals - Pedalling Innovations Catalyst
Rear derailleur - Shimano XT (GS / med-cage) with Wolftooth WolfCage
Rear shifter - Shimano XT
Cassette - Garbaruk 11-50t
Front hub - Project 321 Boost
Rear hub - Project 321 Boost (216POE, Quiet pawls)
Front rim - Nextie Premium Trail 40mm (36mm internal)
Rear rim - Nextie Premium Enduro 36mm (29mm internal)
Spokes - DT Swiss Comp
Tyres - Maxxis DHF 3C 2.6" (Front), Minion Aggressor 2.5" DD (Rear)
Tubes - Stans Tubeless
Total weight - T.B.A
(New pic with a new phone - as I just got a new phone after smashing my old one last weekend. The camera is a big upgrade from the previous, so I should finally be able to get some decent pics in near future)