So, I tried reading the thread in the sticky, but at 81 pages, got a bit overwhelmed. My 29er front tubeless tyre has a slow leak. I suspect it's the valve core (it's a bit bent), but haven't really proven this theory.
I tried removing the tyre, and adding slime, then putting the tyre back on. Inflating it with an air compressor was a pain, but I eventually got it inflated. However, it's gone down again over some hours. I believe I might need new rim tape at least.
I was researching around, and came across Stans NoTubes rim strips (http://www.chainreactioncycles.com/au/en/stans-no-tubes-all-mountain-29er-rim-strip/rp-prod38846 or http://www.chainreactioncycles.com/au/en/stans-no-tubes-xc-29er-rim-strip/rp-prod116736 - no idea what the difference is!).
Is it as simple as installing them, then slime, then inflation?
On the other hand, I'm tempted to just go buy a tube. I don't plan to do any hardcore riding, and maybe this is just easier.
I tried removing the tyre, and adding slime, then putting the tyre back on. Inflating it with an air compressor was a pain, but I eventually got it inflated. However, it's gone down again over some hours. I believe I might need new rim tape at least.
I was researching around, and came across Stans NoTubes rim strips (http://www.chainreactioncycles.com/au/en/stans-no-tubes-all-mountain-29er-rim-strip/rp-prod38846 or http://www.chainreactioncycles.com/au/en/stans-no-tubes-xc-29er-rim-strip/rp-prod116736 - no idea what the difference is!).
Is it as simple as installing them, then slime, then inflation?
On the other hand, I'm tempted to just go buy a tube. I don't plan to do any hardcore riding, and maybe this is just easier.