moorey
call me Mia
I’m sure you’ll be perfectly fine. I don’t imagine they are both running really wide bars, and even if they are, I’m sure you’ll be fine.I want to put two of the same size together so the number board sits straight.
I’m sure you’ll be perfectly fine. I don’t imagine they are both running really wide bars, and even if they are, I’m sure you’ll be fine.I want to put two of the same size together so the number board sits straight.
Attention from a new owner? 2.6 motor?That it is. Another thing waiting for attention.
To be fair, even meccano pieces are preformed.
Do you call the big one ‘bitey’?View attachment 383600
Just had one of these racks delivered(sorry, sideways pic). While most of the time I just throw the bike in the back of the ute, the boys are at an age where they are now keen to explore a bit more on their bikes. This rack was at a price point and gets good reviews. Have been researching racks for a while and managed to get one of these for $430 delivered in the black friday sales.
MonoRail 2"
RockyMounts is located in Grand Junction, Colorado and makes premium car and bike rack accessories in the form of racks, mounts and locks. Cables, Chains, U-locks.rockymounts.com
1997 vintage, but yes. Haven't driven it much, just home when I bought it and around the country block a couple timesAttention from a new owner? 2.6 motor?
For some reason crank holders have gone out of fashion , we dont mind scratched cranks .I am after another crank holder simple metal tray bike rack that holds 2 bikes side by side horizontally.
25 years ago I made one it has been used 1000s of times , I did see a commercial version .
The installer agrees and it's with the manufacturer for a warranty claimA look at the hitch showed that some of the welds were only on one side and pretty poor quality to boot. No damage to bikes or rack thankfully.
On the plus side, I got to order some more gear and drink a lot of beer - so not a total loss.Not a great weekend for him as he also binned fairly hard on his first run down Hero trail with a full day of shuttles booked.
Looking forward to seeing thisI would say that the Deathracks laser cut kit is probably closest to Meccano level: Adult
I am about 4 hours in and still going, had about 2'5 hours on the linisher and grinder to smooth off all the rough cut edges, and only got about 1'5 hours on the welder on monday morning, have only got the hoops and support struts all welded up so far.. still have to attach the hoops to the main beam across the top, weld the two lower beams to the upright, weld on the tiedown points and gussets, weld on the hitch and lower gusset..
I’ve been threatening to make my own mini rack for ages but am now just going to get a set of these to make a quick mini bolt on rack for my existing ute ladder rack. Seems like a good option and well priced with the DIY aspect.Looking forward to seeing this
Might have been tempted to go down this route too if I hadn't got the single trail before your guy surfaced. Definitely would have done that if I still had a ute and could attach the hoops and grooves directly to the tray
Sent from my H8324 using Tapatalk
Aaaand now I'm looking forward to seeing this tooI’ve been threatening to make my own mini rack for ages but am now just going to get a set of these to make a quick mini bolt on rack for my existing ute ladder rack. Seems like a good option and well priced with the DIY aspect.
I hear LabC is a better welder.Looking forward to seeing this
Might have been tempted to go down this route too if I hadn't got the single trail before your guy surfaced. Definitely would have done that if I still had a ute and could attach the hoops and grooves directly to the tray
Sent from my H8324 using Tapatalk
Probably. I'm excellent with an angle grinder thoughI hear LabC is a better welder.
You must master the grinder before the welder.Probably. I'm excellent with an angle grinder though
Sent from my H8324 using Tapatalk
I think the only thing @Plankosaurus does better is piss standing up…and that only going off his word.I hear LabC is a better welder.
Honestly the way things went last week, she probably would have beaten me at that tooI think the only thing @Plankosaurus does better is piss standing up…and that only going off his word.
I smell a story….Honestly the way things went last week, she probably would have beaten me at that too
Sent from my H8324 using Tapatalk
Keen nose! You asked for itI smell a story….
Did he sacrifice a goat in there?View attachment 383613View attachment 383612
Rookie numbers. That’s a pic that Janelle (ClubMud treasurer) sent me, courtesy of her husband Rods efforts.