Flow-Rider
Burner
It wouldn't surprise me if they do.Actually, don't let the bike industry know or they are going to rebrand it and sell it for 25AUD a roll.
It wouldn't surprise me if they do.Actually, don't let the bike industry know or they are going to rebrand it and sell it for 25AUD a roll.
$25..... BwahahahaMy ROAD wheels are still going strong after 1yr tubeless on blue tape. The tape over one of the spokes holes has "inflated inwards" so to speak, but holding up 60-70psi no worries.
Actually, don't let the bike industry know or they are going to rebrand it and sell it for 25AUD a roll.
I just taped up some Hope W35s (35mm internal) yesterday with the Bear outdoor masking tape. One run on each side gives a double layer in the spoke bed, no problems at all.Any other ghetto tape recommendations for a wheel with a 30mm inner width?
Cheers, I also picked up a few extra things to try out some diy downtube protection.I just taped up some Hope W35s (35mm internal) yesterday with the Bear outdoor masking tape. One run on each side gives a double layer in the spoke bed, no problems at all.
I did the same with my Zelvys that had 30mm internal. Never had an issue, seal was perfect.
There was some on the shelf at Bunnings when I walked past it the other day.Sorry for the epic thread dig, but it looks like Bear outdoor masking tape is no longer made so what is the new coolaid?
Which Bunnings!?! PM me!There was some on the shelf at Bunnings when I walked past it the other day.
Really? Has it been discontinued?Which Bunnings!?! PM me!